---
title: "Smart Line"
id: "1171"
type: "page"
slug: "smart-line"
published_at: "2025-03-28T14:24:44+00:00"
modified_at: "2025-05-08T09:40:27+00:00"
url: "https://giottotechnologies.com/smart-line/"
markdown_url: "https://giottotechnologies.com/smart-line.md"
excerpt: "..."
---

[https://giottotechnologies.com/tripler-embosser/](https://giottotechnologies.com/tripler-embosser/)
[https://giottotechnologies.com/industry-transition/](https://giottotechnologies.com/industry-transition/)

Tissue Converting Solutions

Complete converting line to produce  high quality  tissue roll products.

Designed to save energy, maximize operational efficiency and enhance the quality of final products.

Certified line for “TRANSIZIONE 5.0”

[LATEST GENERATION TORQUE MOTORSEnergy reduction up to 15%](#sezione-caratteristiche-giotto)
[The new concept of embossed tissue roll](https://giottotechnologies.com/tripler-embosser/)

Your browser does not support the video tag.

### SMART REWINDER

MORE#### Working speed up to **500 m/min** or **600 m/min**

#### Roll diameter range **90–200 mm**

#### Width from **2750** up to **3650 mm**

#### PATENTED

##### Pick-up Glue Application System

- Pick-up glue applied during core at transfer
- During introduction rotation the core goes in touch with a glueing device
- The glued core is introduced into the cradles area

##### Reduced amount of glue applied

##### Quantity of glue always constant independently from speed

##### No need to remove cores after stop

##### Double perforation system

##### Perforation roll 6 blades

##### Perforation length range:

- 90–180 mm with 6 blades
- 180-360 mm with 3 blades
- 270-540 mm with 2 blades

##### Reduced amount of glue applied

##### Quantity of glue always constant independently from speed

##### No need to remove cores after stop

##### Blades Gap Adjustable by Touch Panel

LESS

### SMART EMBOSSER

MORE#### Working speed up to **500 m/min** or **600 m/min**

#### Steel roll diameter **350 mm** or **420 mm**

#### Automatic change of steel rolls with stand-by rolls accumulator

#### Nip Control

- Rubber roll opening/closing by means of pneumatic cylinders
- Nip adjustment by HMI
- Nip position can be saved in product recipe
- Adjustments can be done while the machine is running

#### Lamination Unit

- Clichè and Anilox roll opening/closing by means of pneumatic cylinders
- Glue rolls gap adjustable by touch panel
- Adjustments can be done while the machine is running

##### Higher safety - operators remain behind guarding

LESS

LATEST GENERATION  
 **TORQUE MOTORS**

Consistent power, **energy optimization** and cost reduction

Energy reduction up to **15%**

Connection coupling torque motor – roll with automatic phasing  
 Automatic roll engage for quick roll change  
 More precise control and higher efficiency

**FOUR LANE**  
 LOG SAW

**Independent motorization**  
 for each lane

Speed up to  
 **240 cuts/min**

Universal clamps range  
 from 90 mm to 240 mm  
 No need to replace parts for different diameters  
 Independent motorization for each lane  
 Idle or motorized sharpening stones  
 Shuttle trim eliminator

**HMI**  
 CONTROL PANEL

**Remote access** to individual production phase

User Friendly

All controls are easy to be managed

## INNOVATION

**Giotto Technologies R&D** department stands out to create sustainable innovation throughout the converting process with patented solutions.

LOWER ENERGY   
CONSUMPTION

LESS   
 NOISE

LESS   
 COMPRESSED AIR

NO   
 HYDRAULICS